1300mm 1600mm Acrylic Adhesive for BOPP Tape Manufacture Machine

• Customization: Available
• Core Components: PLC, Engine, Bearing, Gearbox, Motor, Pressure Ves
• Voltage: 380V/50Hz
• Model NO.: GD-210
• Exchange Shaft System: Manual/Automatic
• Label Posting System: Manual/Automatic
• Length Meter Counter: 3 Phase
• Key Selling Points: High-Accuracy
• Warranty of Core Components: 1 Year
• Machinery Test Report: Provided
• Transport Package: Standard Sea Exported Wooden Package
• Specification: 2700X1700X1550mm
• Trademark: GD
• Origin: China
• HS Code: 844110000
• Production Capacity: 20 Sest/Sets Month
• Package Size: 60.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 1000.000kg

Product Description

Product Description

 

This automatic tape rewinding slitting machine can slit bopp tape, fiberglass tape,aluminum tape ,masking tape, kraft tape, duct tape etc.

SPECIFICATIONS FOR Automatic tape slitting machine
operation width		1300mm/1600mm
max unwinding diameter		800mm
max rewinding diameter		4 shaft 320mm, 2000m length
min slitting width		12mm
rewinding speed		200m/min
cutting tool		0.2x22x60mm
Machine power		5.5w

Features:
1. Centralized panel control, simple and easy operating
2. Automatic exchange shafts: when winding complete, two winding shafts exchange position to continue working.
3. Variable frequency control to regulate speed. When stopping machine, the tape can be stopped instantly.
Voltage: Main slitter, 380v 3 phase 4 lines Small rewinder, 220v, single phase
 

Detailed Photos

 

How to Use a Tape Slitting Machine

A tape slitting machine is used to cut large rolls of tape into smaller, precisely sized rolls. Below are the general steps to operate a tape slitting machine efficiently:

1. Preparation

• Ensure the machine is clean and in proper working condition.
• Select the appropriate cutting blades and adjust them according to the required width of the tape.
• Load the jumbo roll of tape onto the unwinding shaft, securing it properly.

2. Machine Setup

• Adjust the tension settings to ensure smooth feeding of the tape.
• Set the cutting width, speed, and other necessary parameters using the control panel.
• Align the guiding system to keep the tape moving in a straight path.

3. Slitting Process

• Start the machine and let it gradually reach the desired speed.
• The tape will unwind, pass through the blades, and be slit into multiple narrower rolls.
• The slit rolls will then be rewound onto the winding shafts.

4. Quality Inspection

• Check the cut edges of the tape to ensure they are clean and smooth.
• Measure the width of the finished rolls to confirm accuracy.
• If necessary, make adjustments to the blade position or tension settings.

5. Finishing & Collection

• Once the slitting process is complete, stop the machine.
• Remove the finished rolls carefully and check for any defects.
• Pack the rolls according to the required specifications.

6. Machine Maintenance

• Clean the machine regularly to prevent adhesive buildup.
• Inspect and replace worn-out blades for consistent cutting quality.
• Lubricate moving parts to ensure smooth operation and longevity.